Waterpump
7426373
Bobcat T590 Parts
The Bobcat T590 is a 61 hp compact track loader with 2,100 lb rated operating load, 17.1 gal/min hydraulic pump and 7,822 lb operating weight. We carry aftermarket and replacement parts for it, built to original equipment specifications — search by part number or description to find the right part for your machine.
Weight- Tuned
7270373
Wheel - Timing-Dl02
7030461
Wind Kit
7186723
Window - Left Vinyl Cab
7030083
Window - Right Vinyl Cab
7030084
Window Panel Glass
7186644
Window- D
7171099
Wire
6687930
Wraparoun
7194262
Yoke
6680373
Yoke- Fla
7191332
Bobcat T590 Parts at IndustrialPDC
Our T590 catalog covers hydraulic components, undercarriage and track parts, electrical components, bearings and seals, drivetrain parts, and cab and operator components — among other parts. Specifications for the machine are listed below.
| Group | Specification | Value |
|---|---|---|
| Engine | Bore | 3.5 in |
| Displacement | 158.7 cu in | |
| Emission Tier Level | Tier 4 | |
| Engine Model | V2607-DI-TE3B Interim Tier 4 | |
| Fuel | Diesel | |
| Gross Power | 61 hp | |
| Horsepower - Gross | 66 hp | |
| Number Of Cylinders | 4 | |
| Peak Torque | 155.6 lb ft | |
| Power Measured @ | 2,700 rpm | |
| Stroke | 4.4 in | |
| Torque Measured @ | 1,425 rpm | |
| Operational | Cooling System Fluid Capacity | 3 gal |
| Engine Oil Capacity | 2.6 gal | |
| Fuel Capacity | 36.5 gal | |
| Operating Weight | 7,822 lb | |
| Loader | Breakout Force | 4,753 lb |
| Operating Load | 2,100 lb | |
| Hydraulic | Pump Flow | 17.1 gal/min |
| Pump Type | Engine driven, gear type | |
| Relief Valve Pressure | 3,500 psi | |
| Undercarriage | Ground Pressure | 5.1 psi |
| Length Of Track On Ground | 4.51 ft | |
| Width Of Track | 12.6 in | |
| Dimensions | Height To Top Of Cab | 6.49 ft |
| Length With Bucket | 11.09 ft | |
| Length With Out Bucket | 8.72 ft | |
| Overall Height | 6.49 ft | |
| Overall Length | 11.09 ft | |
| Overall Width | 5.59 ft | |
| Reach At Max Lift And Dump | 1.61 ft | |
| Turning Radius From Center - Machine Rear | 6.67 in |
Why buyers choose us
OEM-Spec Fitment. Built to meet or exceed original equipment specifications.
Fast Nationwide Shipping. In-stock parts ship the same business day.
Part Verification. Confirm fitment by part number before you order.
Guides for this model
Rubber tracks: choosing, maintaining and replacing them
Rubber tracks let a machine work on difficult ground while leaving surfaces largely unmarked. They stretch and lose tension as they age, and they crack, so daily checks matter. A track is sized by width, pitch and link count, and it is replaced together with its sprocket, because the two wear out as a unit. Expect 400 to 2,000 working hours.