91474116 JLG O-Ring - 1.36 in (id) - 0.1 in
Replacement for:
JLG
Part number:
91474116
SKU:
JL91474116
Weight:
0.002 lbs
Top Fitment Quick-Check
Checking availability...
The JLG O-Ring - 1.36 in (id) - 0.1 in (part #91474116) is an aftermarket replacement seal for JLG aerial work platforms. Seals and O-rings contain fluids and keep contaminants out, and are replaced during service to prevent leaks. It fits 14 JLG aerial work platform models, including the 534D-10, 534D-9, 619A, and 723A. Confirm the correct part for your equipment by matching your model and serial prefix in the fitment table below, or by part number 91474116.
| Make | Model | Vehicle Type |
|---|---|---|
| JLG | G6-42A | Aerial Work Platform |
| JLG | 29.6LP | Aerial Work Platform |
| JLG | 2906H | Aerial Work Platform |
| JLG | 35.7 | Aerial Work Platform |
| JLG | 3507H | Aerial Work Platform |
| JLG | 534D-10 | Aerial Work Platform |
| JLG | 534D-9 | Aerial Work Platform |
| JLG | 619A | Aerial Work Platform |
| JLG | 723A | Aerial Work Platform |
| JLG | Agrovector 29.6 | Aerial Work Platform |
| JLG | G5-19A | Aerial Work Platform |
| JLG | G6-23A | Aerial Work Platform |
| JLG | L2906H | Aerial Work Platform |
| JLG | TF6-42 | Aerial Work Platform |