1060847 JLG Cable- Batt 1 Ga 50 in 5/16
Replacement for:
JLG
Part number:
1060847
SKU:
JL1060847
Top Fitment Quick-Check
The JLG Cable- Batt 1 Ga 50 in 5/16 (part #1060847) is an aftermarket replacement control component for JLG aerial work platforms. Controls and levers relay operator input from the platform and ground stations, and are replaced when worn or damaged to keep operation precise. It fits over 20 JLG aerial work platform models, including the E400AJP, E400AJPN, E400AN, and E450A. Confirm the correct part for your equipment by matching your model and serial prefix in the fitment table below, or by part number 1060847.
| Make | Model | Vehicle Type |
|---|---|---|
| JLG | M600 | Aerial Work Platform |
| JLG | E300A | Aerial Work Platform |
| JLG | E300AJ | Aerial Work Platform |
| JLG | E300AJP | Aerial Work Platform |
| JLG | E400A | Aerial Work Platform |
| JLG | E400AJP | Aerial Work Platform |
| JLG | E400AJPN | Aerial Work Platform |
| JLG | E400AN | Aerial Work Platform |
| JLG | E450A | Aerial Work Platform |
| JLG | E450AJ | Aerial Work Platform |
| JLG | E450AJP | Aerial Work Platform |
| JLG | E600 | Aerial Work Platform |
| JLG | E600J | Aerial Work Platform |
| JLG | E600JP | Aerial Work Platform |
| JLG | M400A | Aerial Work Platform |
| JLG | M400AJN | Aerial Work Platform |
| JLG | M400AJP | Aerial Work Platform |
| JLG | M400AJPN | Aerial Work Platform |
| JLG | M400AN | Aerial Work Platform |
| JLG | M450AJ | Aerial Work Platform |
| JLG | M600J | Aerial Work Platform |
| JLG | M600JP | Aerial Work Platform |